Farzad, M. and Yagoobi, J., “Enhancement of Drying of Food Products with Slot Jet Reattachment Nozzles in a Convective Oven with a Moving Belt”, International Drying Symposium, Worcester, MA, June 2022 (IDS2020 postponed to 2022 due to pandemic, accepted).
Yang, M. and Yagoobi, J., “Statistical Analysis of Moist Porous Media with Dielectrophoresis Mechanism”, International Drying Symposium, Worcester, MA, June 2022 (IDS2020 postponed to 2022 due to pandemic, accepted).
Yang M. and Yagoobi, J., “Drying of Paper with Dielectrophoresis Mechanism’’, International Drying Symposium, Worcester, MA, June 2022 (IDS2020 postponed to 2022 due to pandemic, accepted).
Asar, M. E., Yang, E., and Yagoobi, J., “Slot Jet Reattachment Nozzles’ Flow Field with Various Mesh-Type Conveyor Belts”, International Drying Symposium, Worcester, MA, June 2022 (IDS2020 postponed to 2022 due to pandemic, accepted).
Noori, Z., Yagoobi, J., and Tilley, B., “Experimental Study of Drying of Paper with Ultrasound Mechanism”, International Drying Symposium, Worcester, MA, June 2022 (IDS2020 postponed to 2022 due to pandemic, accepted).
Rodriquez Ramirez, J., Farzad, M., Noori, Z., and Yagoobi, J., “Radial Jet Reattachment Impingement Drying of Corn Tortillas”, International Drying Symposium, Worcester, MA, June 2022 (IDS2020 postponed to 2022 due to pandemic, accepted).
Yang, M., Asar M. E., and Yagoobi, J., “Experimental Study of Heat Transfer Characteristic of Drying Process with Dielectrophoresis Mechanism”, ASME International Mechanical Engineering Congress and Exposition, E-Proceedings, November 2021 (virtual).
Asar, M. E., Yagoobi, J., “A Numerical Study: Drying of a Fully Saturated Porous Medium With Excess Water Layers”, ASME International Mechanical Engineering Congress and Exposition, E-Proceedings, November 2021 (virtual).
O’Connor, N. and Yagoobi, J., “An Innovative Electrohydrodynamic Conduction Pumping Design for Swirl Flow Generation”, IEEE-IAS Annual Meeting, E-Proceedings, October 2021 (virtual).
Nishikawara, M. O’Connor, N. J., and Yagoobi, J., “Numerical study of Dielectric Fluid Bubble Behavior in Microchannel Evaporator in Presence of Diverging Electric Field”, IEEE-IAS Annual Meeting, E-Proceedings, October 2021 (virtual).
Asar, M. E., Noori, Z., Yagoobi, J., “Preliminary Numerical Investigation of the Effect of Ultrasound on Paper Drying”, PaperCon2021, E-Proceedings, May 2021 (virtual).
Castaneda, A.J., O’Connor, N.J., and Yagoobi, J., “Investigations of Gravity Effect on Electrically Driven Liquid Film Flow Boiling: A Micro-Gravity Flight Campaign in Preparation of ISS Experiment”, ASME International Mechanical Engineering Congress and Exposition, E-Proceedings, Portland, OR, November 2020 (virtual).
Nishikawara, M. and Yagoobi, J., “Experimental Study of Electrohydrodynamic Conduction Pumping Embedded in Micro-Scale Evaporator”, IEEE-IAS Annual Meeting, E-Proceedings, Detroit, MI, October 2020 (virtual).
M. Farzad and J. Yagoobi. ”Effect of impingement surface velocity on Slot Jet and Slot Jet Reattachment nozzles’ flow field.” In IMECE2019. International Mechanical Engineering Congress and Exposition. Salt Lake City, November 2019.
Yang, Mengqiao, Jamal Yagoobi, and Burt Tilley. “Enhancement of Drying Rate of Moist Porous Media with Electrohydrodynamically Assisted Slot Jet Reattachment Nozzle–A Numerical Study.” In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019.
Vázquez, P. A., J. Seyed-Yagoobi, P. Traoré, and C. Louste. “EHD Pumping in Flexible Conic Nozzle.” In 2019 IEEE 20th International Conference on Dielectric Liquids (ICDL), pp. 1-4. IEEE, 2019.
Noori, Zahra, J. Yagoobi, and Burt Tilley. “Fundamental Understanding of Bound Water Removal in Paper Drying Process: Microscopic Approach.” Proc. PeperCon2019, 2019.
M. Farzad, M. Yang, J. Yagoobi, and B. Tilley. ”Drying of moist food snacks with innovative slot jet reattachment nozzle.” In IDS 2018. 21st International Drying Symposium Proceedings, pp. 1559-1666. Editorial Universitat Polit`ecnica de Val`encia, 2018.
F. Dur ́an-Olivencia, M. Farzad, B. Tilley, and J. Yagoobi. ”Multifluid macroscopic approach to drying in papermaking.” In IDS 2018. 21st International Drying Symposium Proceedings, pp. 1285-1292. Editorial Universitat Polit`ecnica de Val`encia, 2018.
Khakpour, Y. and Seyed-Yagoobi, J., “Numerical Study of Heat Transfer Characteristics of Liquid Flow in a Microtube with Blend of Micro Phase Change Materials”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Houston, Texas, November 2012.
Robinson, F., Patel, V. K., Seyed-Yagoobi, J., and Didion, J., “Terrestrial and Micro-Gravity Experimental Study of Micro-Scale Heat Transport Device Driven by EHD Conduction Pumping”, Electrostatic Society of America, Institute of Electrostatic Japan, International Electrostatic Assembly, IEEE Industry Applications Society, La Societe Francaise d’Eelectrostatique Joint Conference, CD ROM, Ontario, Canada, June 2012.
Yang, L., Patel, V., Seyed-Yagoobi, J., Jun, S., Sinha-Ray, S., Zhang, Y., Yarin, A., ”Enhancement of Nucleate Boiling Heat Transfer with Nanofiber Mat”, ASME Heat Transfer Conference, Rio Grande, Puerto Rico, July 2012.
Pearson, M.R. and Seyed-Yagoobi, J., “Single- and Two-Phase Flow in Micro-Channels with Heat Transfer and Driven by an EHD Conduction Pump”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Denver, Colorado, November 2011.
Pearson, M. R. and Seyed-Yagoobi, J., “Radial Heat Transport Device Driven by EHD Conduction”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Denver, Colorado, November 2011.
Pearson, M. R. and Seyed-Yagoobi, J., “EHD Conduction-Driven Enhancement of Critical Heat Flux in Pool Boiling”, IEEE-IAS Annual Meeting, CD ROM, Orlando, Florida, October 2011.
Patel, V. and Seyed-Yagoobi, J., “Dielectric Fluid Flow Generation in Meso-Tubes with Micro-Scale Electrohydrodynamic Conduction Pumping”, 17th IEEE International Conference on Dielectric Liquids, CD ROM, Trondheim, Norway, June 2011.
Spenko, M. and Seyed-Yagoobi, J., “Integrating Innovation into Engineering Education”, ASEE Annual Conference & Exposition, CD ROM, Vancouver, Canada, June 2011.
Yazdani, M. and Seyed-Yagoobi, J., “Control of Dielectric Fluid Flow Distribution in Micro- and Nano-Tubes with EHD Conduction Pumping – Numerical Study”, ASME/JSME Thermal Engineering Conference, CD ROM, Honolulu, Hawaii, March 2011.
Yazdani, M. and Seyed-Yagoobi, J., “Heat Transfer Enhancement of Backstep Flow by Means of EHD Conduction Pumping”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Vancouver, Canada, November 2010.
Yazdani, M. and Seyed-Yagoobi, J., “The Effect of Charge Injection on EHD Conduction Pumping”, IEEE-IAS Annual Meeting, CD ROM, Houston, Texas, October 2010.
Sabbah, R., Seyed Yagoobi, J., and Al Hallaj, S., “Characteristics of Hydro-Dynamically and Thermally Developing Liquid Flow with Micro-Encapsulated Phase Change Material”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Orlando, Florida, November 2009.
Sabbah, R., Seyed Yagoobi, J., and Al Hallaj, S., “Natural Convection with Micro-Encapsulated Phase Change Material”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Orlando, Florida, November 2009.
Yazdani, M. and Seyed-Yagoobi, J., “Heat Transfer Augmentation of Parallel Flows by Means of Electric Conduction Phenomenon in Macro- and Micro-scale”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Orlando, Florida, November 2009.
Yazdani, M. and Seyed-Yagoobi, J., “Effect of Charge Mobility on Electric Conduction Driven Dielectric Liquid Flow”, Electrostatics Joint Conference, CD ROM, Boston, Massachusetts, June 2009.
Pearson, M.R. and Seyed-Yagoobi, J., “Experimental Study of EHD Conduction Pumping at the Micro-Scale”, Electrostatics Joint Conference, CD ROM, Boston, Massachusetts, June 2009.
Pearson, M. R. and Seyed-Yagoobi, J., “Experimental Study of a Two-Phase Heat Transport Device Driven by Electrohydrodynamic Conduction Pumping”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Boston, Massachusetts, November 2008.
Sabbah, R. and Seyed-Yagoobi, J., “Experimental Investigation of Heat Transfer Characteristics of Liquid Flow with Micro-Encapsulated Phase Change Material”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Boston, Massachusetts, November 2008.
Yazdani, M. and Seyed-Yagoobi, J., “An Electrically Driven Impinging Liquid Jet for Direct Cooling of Heated Surfaces”, IEEE-IAS Annular Meeting, CD ROM, Edmonton, Canada, October 2008.
Sabbah, R. and Seyed-Yagoobi, J., “Experimental and Numerical Investigation of Heat Transfer Characteristics of Liquid Flow with Micro-Encapsulated Phase Change Material”, ASME Heat Transfer, Fluids, Energy and Energy Nano Conferences, CD ROM, Jacksonville, Florida, August 2008.
Yazdani, M. and Seyed-Yagoobi, J., “Thermal Homogenization in Spherical Reservoir by EHD Conduction Phenomenon”, ASME Heat Transfer, Fluids, Energy and Energy Nano Conferences, CD ROM, Jacksonville, Florida, August 2008.
Pearson, M. R. and Seyed-Yagoobi, J., “Advances in Electrohydrodynamic Conduction Pumping”, 16th IEEE International Conference on Dielectric Liquids, CD ROM, Poitiers, France, June 2008 (Keynote Presentation).
Yazdani, M. and Seyed-Yagoobi, J., “Heat Transfer Enhancement of a Poiseuille Flow by Means of Electric Conduction Phenomenon”, 16th IEEE International Conference on Dielectric Liquids, CD ROM, Poitiers, France, June 2008.
Pearson, M. R. and Seyed-Yagoobi, J., “Interactions between Bubbles in Close Proximity under Uniform and Non-Uniform Electric Fields”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Seattle, Washington, November 2007.
Yazdani, M. and Seyed-Yagoobi, J., “Enhancement of External Condensation Heat Transfer by Pumping of Liquid Condensate Circumferentially with Electric Conduction Phenomenon”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Seattle, Washington, November 2007.
Yazdani, M. and Seyed-Yagoobi, J., “Fluid Circulation within a Spherical Reservoir with EHD Conduction Pumping”, IEEE-IAS Annular Meeting, CD ROM, New Orleans, Louisiana, September 2007.
Yazdani, M. and Seyed-Yagoobi, J., “Numerical Investigation of EHD Conduction Pumping of Liquid Film with Phase Change”, ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, CD ROM, Vancouver, Canada, July 2007.
Jeong, S.I. and Seyed-Yagoobi, J., “Enhancement of Heat Transport Capacity of a Monogroove Heat Pipe with Electrohydrodynamic Conduction Pumping”, Proceedings of 2006 International Symposium on EHD, pp. 243-246 Buenos Aires, Argentina, December 2006.
Yazdani, M. and Seyed-Yagoobi, J., “Electrohydrodynamic Conduction Pumping of Liquid Film in Annular Regime”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Chicago, Illinois, November 2006.
Pearson,M. and Seyed-Yagoobi, J., “Numerical study of Dynamic Behavior of Dielectric Fluid Bubbles within Diverging External Electrical Fields”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Chicago, Illinois, November 2006.
Siddiqui, M.A.W. and Seyed-Yagoobi, J., “Experimental Study of Pumping of Liquid Film With Conduction Phenomenon”, Joint IEEE- IAS, ESA, IEJ, and SFE Meeting, CD ROM, Berkeley, California, June 2006.
Pearson, M. and Seyed-Yagoobi, J., “Numerical Study of Bubble Behavior of Dielectric Fluids within Diverging External Electric Fields”, 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, CD ROM, San Francisco, California, June 2006.
Solanki, S. M., Arikapudi, R. K., and Seyed-Yagoobi, J., “Electrohydrodynamic Conduction Pumping of Dielectric Liquids with Zero Drag Electrodes in Macro and Micro Scale Channels”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Orlando, Florida, November 2005.
Aldini, S. A. and Seyed-Yagoobi, J., “Electrohydrodynamic Induction Pumping of Liquid Film in Vertical Annular Configuration”, IEEE-IAS Annular Meeting, CD ROM, Hong Kong, China, October 2005.
Seyed-Yagoobi, J., “Electrohydrodynamic Induction Pumping of Dielectric Liquid Films”, 15th IEEE International Conference on Dielectric Liquids, CD ROM, Coimbra, Portugal, June 2005 (keynote presentation).
Seyed-Yagoobi, J., “Electrohydrodynamic Pumping of Dielectric Liquids”, 10th International Conference on Electrostatics, CD ROM, Espoo/Helsinki, Finland, June 2005 (keynote presentation).
Feng, Y. and Seyed-Yagoobi, J., “Control of Adiabatic Liquid/Vapor Flow Distribution Utilizing EHD Conduction Pumping Mechanism”, ASME International Mechanical Engineering Congress and Exposition, CD ROM, Anaheim, California, November 2004.
Feng, Y. and Seyed-Yagoobi, J., “Control of Liquid Flow Distribution Utilizing EHD Conduction Pumping Mechanism”, IEEE-IAS Annual Meeting, CD ROM, Seattle, Washington, October 2004.
Seyed –Yagoobi, J., “Electrohydrodynamic Pumping”, 5th International EHD Workshop, CD ROM, Poitiers, France, August 2004 (keynote presentation).
Feng, Y. and Seyed-Yagoobi, J., “Control of Liquid and Liquid/Vapor Flow Distributions with EHD Conduction Pumping”, 5th International EHD Workshop, CD ROM, Poitiers, France, August 2004.
Seyed-Yagoobi, J. and Noboa, H., “Heating/Drying of Uncoated Paper with Gas-Fired and Electric Infrared Emitters – Fundamental Understanding”, Proceedings of 14thInternational Drying Symposium, pp. 1217-1224, Vol. B, Sao Paulo, Brazil, August 2004.
Narayanan, V., Seyed-Yagoobi, J., and Page, R. H., “Transient Surface Visualization of Near-Wall Structures in Reattaching Slot Jets”, 11th International Symposium on Flow Visualization, CD ROM, Notre Dame, Indiana, August 2004.
Seyed-Yagoobi, J., “Pumping of Micro Thin Liquid Films with Electrohydrodynamic Induction Pumping,” Proceedings of International Symposium on Micro-Mechanical Engineering, pp. 369-374, Tsuchiura, Japan, December 2003.
Feng, Y., Seyed-Yagoobi, J., and Datta, S., “EHD Conduction Pump Designed for Flow Control of Parallel Evaporators,” ASME International Mechanical Engineering Congress and Exposition, CD ROM, Washington, D.C., November 2003.
Aldini, S. and Seyed Yagoobi, J., “Stability of Electrohydrodynamic Induction Pumping of Liquid Film in Vertical Annular Configuration,” Proceedings of Joint IEEE-IAS and Electrostatic Society of America Annual Meeting, pp. 24-41, Little Rock, Arkansas, June 2003.
Seyed-Yagoobi, J., “Enhancement of Heat Transfer in Dielectric Liquids with Electrical Conduction Phenomenon,” Proceedings of 7th International Conference on Properties and Applications of Dielectric Materials, Nagoya, Japan, June 2003.
Aldini, S. and Seyed Yagoobi, J., “An analytical study of Electrohydrodynamic Induction Pumping of Liquid Film in an Annular Configuration,” 6th ASME-JSME Thermal Engineering Joint Conference, CD ROM, Hawaii Island, Hawaii, March 2003.
Brand, K. and Seyed-Yagoobi, J., “Experimental Study of Electrohydrodynamic Induction Pumping of a Dielectric Micro Liquid Film in External Horizontal Condensation Process,” ASME International Mechanical Engineering Congress and Exposition, CD ROM, New Orleans, Louisiana, November 2002.
Jeong, S.I. and Seyed-Yagoobi, J., “Performance Enhancement of a Monogroove Heat Pipe with Electrohydrodynamic Conduction Pumping,” ASME International Mechanical Engineering Congress and Exposition, CD ROM, New Orleans, Louisiana, November 2002.
Jeong, S.I. and Seyed–Yagoobi, J., “Innovative Electrode Designs for Electrohydrodynamic Conduction Pumping,” Proceedings of IEEE-IAS Annual Meeting, CD ROM, Pittsburgh, Pennsylvania, October 2002.
Narayanan, V., Seyed-Yagoobi, J., and Page, R.H., “Combined Fluid Mechanics and Heat Transfer Measurements in Normally Impinging Slot Jet Flows,” Proceedings of 5th International Symposium on Engineering Turbulence Modeling and Measurements, CD ROM, Mallorca, Spain, September 2002.
Noboa, H. and Seyed-Yagoobi, J. “Drying of Uncoated Paper with Gas-Fired Infrared Emitters – Optimum Emitters’ Location within the Paper Machine Drying Section,” Proceedings of13th International Drying Symposium, pp. 81-87, Vol. A, Beijing, China, August 2002 (keynote presentation).
Feng, Y. and Seyed-Yagoobi, J., “Electrohydrodynamically Enhanced and Suppressed Convective Boiling Heat Transfer – Theoretical Predictions versus Experimental Data,” Proceedings of 12th International Heat Transfer Conference, CD ROM, Grenoble, France, August 2002.
Jeong, S.I. and Seyed-Yagoobi, J., “Fluid Circulation in an Enclosure Generated by Electrohydrodynamic Conduction Phenomenon,” Proceedings of 14th International Conference on Dielectric Liquids, pp. 41-44, Graz, Austria, July 2002.
Narayanan, V., Seyed-Yagoobi, J., and Page, R.H., “Experimental Flow Field and Heat Transfer Study of a Slot Jet Reattaching Onto a Flat-Plate,” ASME International Mechanical Engineering Congress and Exposition, CD ROM, New York, New York, November 2001.
Seyed-Yagoobi, J. and Sikirica, S., “Pre-Heating/Drying of Uncoated Paper Sheet with Gas-Fired Infrared Emitters: Fundamentals and Applications,” Proceedings of International Gas Research Conference, Amsterdam, the Netherlands, November 2001.
Jeong, S.I., Seyed-Yagoobi, J., and Atten, P., “Theoretical/Numerical Study of Electrohydrodynamic Pumping Through Pure Conduction Phenomenon,” Proceedings of IEEE-IAS Annual Meeting, CD ROM, Chicago, Illinois, October 2001.
Seyed-Yagoobi, J., “Enhancement of Heat Transfer with Reattachment Jets,” Proceedings of The Second Inter-American Drying Conference, pp. 57-68, Veracruz, Mexico, July 2001 (keynote presentation).
Jeong, S.I. and Seyed-Yagoobi, J., “An Innovative Pumping Technology – Electrohydrodynamic Pumping Through Conduction Phenomenon,” Space Technology and Applications International Forum, Albuquerque, CD ROM, New Mexico, February 2001.
Jeong, S.I., Seyed-Yagoobi, J., and Atten, P., “Experimental Study of Electrohydrodynamic Pumping Through Conduction Phenomenon,” HTD-Vol. 366-4, pp. 193-198, ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November 2000.
Brand, K. and Seyed-Yagoobi, J., “Electrohydrodynamic Induction Pumping of a Stratified Liquid/Vapor Medium in the Presence of Heat Transfer,” HTD-Vol. 366-4, pp. 153-160, ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November 2000.
Brand, K. and Seyed-Yagoobi, J., “Effect of Electrode Position on Electrohydrodynamic Induction Pumping of a Stratified Liquid/Vapor Medium,” Proceedings of IEEE-IAS Annual Meeting, CD ROM, Rome, Italy, October 2000.
Seyed-Yagoobi, J. and Wirtz, J., “An Experimental Study of Gas-Fired Infrared Drying of Paper,” Proceedings of12th International Drying Symposium, CD ROM, Noordwijkerhout, The Netherlands, August 2000.
Seyed-Yagoobi, J., Sikirica, S.J. and Counts, K.M., “Heating/Drying of Paper Sheet with Gas-Fired Infrared Emitters-Pilot Machine Trials,” Proceedings of 12th International Drying Symposium, CD ROM, Noordwijkerhout, The Netherlands, August 2000.
Narayanan, V., Page, R.H., and Seyed-Yagoobi, J., “Airflow Visualization via Infrared Thermography,” Proceedings of9th International Symposium on Flow Visualization, CD ROM, Edinburgh, Scotland, United Kingdom, August 2000.
Wawzyniak, M. and Seyed-Yagoobi, J., “Electrohydrodynamic Induction Pumping of a Stratified Liquid/Vapor Medium,” Proceedings of 2nd International Workshop on Electrical Conduction, Convection, and Breakdown in Fluids, pp. 166-169, Grenoble, France, May 2000.
Seyed-Yagoobi, J., Sikirica, S.J., and Ricks, M.R., “On-Line Pre-Heating/Drying of Paper Sheet with Gas-Fired Infrared Emitters,” Proceedings of Technical Association of Pulp and Paper Industries Papermakers Conference, CD ROM, Vancouver, Canada, April 2000.
Husain, A.N., Seyed-Yagoobi, J., and Wirtz, J.W., “Theoretical and Experimental Study of Heating/Drying of Paper Sheet with Gas Heated Infrared Emitter,” HTD-Vol. 364-3, pp. 261-271, ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennessee, November 1999.
Noboa, H. and Seyed-Yagoobi, J., “A Critical Review of Drying Models for Coated Paper,” HTD-Vol. 364-3, pp. 247-260, ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennessee, November 1999.
Wawzyniak, M. and Seyed-Yagoobi, J., “Electrohydrodynamic Induction Pumping of a Stratified Liquid/Vapor Medium in the Presence of Volumetric and Interface Electric Charges,” Proceedings of IEEE-IAS Annual Meeting, CD ROM, Phoenix, Arizona, October 1999.
Seyed-Yagoobi, J., “Augmentation of Two-Phase and Single-Phase Heat Transfer and Mass Transport with Electrohydrodynamics in Thermal Equipment,” Proceedings of The13th International Conference on Dielectric Liquids,” pp. 378-383, Nara, Japan, July 1999 (keynote presentation).
Atten, P. and Seyed-Yagoobi, J., “Electrohydrodynamically Induced Dielectric Liquid Flow Through Pure Conduction in Point/Plane Geometry-Theory,” Proceedings of The13th International Conference on Dielectric Liquids, pp. 231-234, Nara, Japan, July 1999.
Seyed-Yagoobi, J. Atten, P., Bryan, J.E., Feng, Y., and Malraison, B., “Electrohydrodynamically Induced Dielectric Liquid Flow Through Pure Conduction in Point/Plane Geometry-Experimental Study,” Proceedings of The13th International Conference on Dielectric Liquids, pp. 548-551, Nara, Japan, July 1999.
Seyed-Yagoobi, J. and Bryan, J.E., “Enhancement of Heat Transfer and Mass Transport in Thermal Equipment with Electrohydrodynamics,” Proceedings of the Electrostatics’ 99 Conference, pp. 127-130, Cambridge, England, March 1999.
Wawzyniak, M., Seyed-Yagoobi, J., and Morrison, G.L., “An Experimental Study of Electrohydrodynamics Induction Pumping of a Stratified Liquid/Vapor Medium,” Proceedings of The 5th ASME/JSME Thermal Engineering Joint Conference, CD ROM, San Diego, California, March 1999.
Wu, J. and Seyed-Yagoobi, J., “Combustion Measurements of an Array of Radial Jet Reattachment Combustion Nozzles,” Proceedings of the5th ASME JSME Thermal Engineering Joint Conference, CD ROM, San Diego, California, March 1999.
Asensio, C.M. and Seyed-Yagoobi, J., “Modeling Multi-Phase Transport in Deformable, Hygroscopic Porous Media: Applications to Convective Drying of Lumber,” Proceedings of The5th ASME JSME Thermal Engineering Joint Conference, CD ROM, San Diego, California, March 1999.
Narayanan, V., Seyed-Yagoobi, J., and Page, R.H., “Representation of Local Heat Transfer Coefficient for Slot and Radial Jet Reattachment Nozzles,” HTD-Vol. 361-1, pp. 229-236, ASME International Mechanical Engineering Congress and Exposition, Anaheim, California, November 1998.
Wawzyniak, M. and Seyed-Yagoobi, J., “Stability of Electrohydrodynamic Induction Pumping of a Stratified Liquid/Vapor Medium in the Presence of an External Load,” Proceedings of IEEE-IAS Annual Meeting, CD ROM, St. Louis, Missouri, October 1998.
Page, R.H., Seyed-Yagoobi, J., and Narayanan, V., “Flow Visualization of Impinging Jet Flow from Innovative Nozzles,” Proceedings of 8th International Symposium on Flow Visualization, CD ROM, Sorrento, Italy, September 1998.
Alam, S.A., Seyed-Yagoobi, J., Narayanan, V., and Page, R.H., “Drying Characteristics of Slot Jet Reattachment Nozzle,” Proceedings of11th International Drying Symposium, Vol. A, pp. 565-572, Thessaloniki, Greece, August 1998.
Li, Y.B., Seyed-Yagoobi, J., Moreira, R.G., and Yamsaengsung, R., “Superheated Steam Impingement Drying of Tortilla Chips,” Proceedings of11th International Drying Symposium, Vol. B, pp. 1221-1228, Thessaloniki, Greece, August 1998.
Bryan, J.E. and Seyed-Yagoobi, “Electrohydrodynamically Enhanced Convective Boiling: Relationship between Electrohydrodynamics Force and Flow Momentum,” HTD-Vol. 357-3, pp. 87-98, 7th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, Albuquerque, N.M., June 1998.
Bryan, J.E. and Seyed-Yagoobi, J., “Electrohydrodynamically Enhanced Convective Boiling of Alternative Refrigerants: Fundamental Understanding,” Proceedings of Third International Conference on Multiphase Flow, CD ROM, Lyon, France, June 1998.
Seyed-Yagoobi, J., Bryan, J.E., and Raghupathi, P., “Electrohydrodynamically Enhanced Pool Boiling of Alternative Refrigerants – Fundamental Understanding,” Proceedings of Third International Conference on Multiphase Flow, CD ROM, Lyon, France, June 1998.
Seyed-Yagoobi, J. and Page, R.H., “Enhancement of Heat Transfer with Innovative Impinging Jets,” Proceedings of The 10th International Symposium on Transport Phenomena in Thermal Science and Process Engineering, Vol. 2, pp. 343-348, Kyoto, Japan, December 1997.
Bryan, J.E. and Seyed-Yagoobi, J., “Influence of Flow Regime, Heat Flux, and Mass Flux on Electrohydrodynamically Enhanced Convective Boiling,” HTD-Vol. 351, pp. 187-196, ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, November 1997.
Hardesty, J.T., Raghupathi, P., Seyed-Yagoobi, J., Bryan, J.E., and Wawzyniak, M., “Effect of Fluid Properties on Electrohydrodynamically Enhanced Heat Transfer in Pool Boiling,” HTD-Vol. 351, pp. 197-204, ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, November 1997.
Wawzyniak, M. and Seyed-Yagoobi, J., “An Analytical Study of Electrohydrodynamic Induction Pumping of a Stratified Liquid/Vapor Medium,” Proceedings of 1997 IEEE-IAS Annual Meeting, pp. 1879-1886, New Orleans, Louisiana, October 1997.
Narayanan, V., Seyed-Yagoobi, J., Page, R.H., and Alam, S.A., “Effect of Exit Angle on Heat Transfer Characteristics of a Slot Jet Reattachment Nozzle,” HTD-Vol. 347, pp. 119-127, 1997 National Heat Transfer Conference, Baltimore, Maryland, August 1997.
Mohr, J.W., Seyed-Yagoobi, J., and Page, R.H., “Flame Impingement Heat Transfer from an Array of Radial Jet Reattachment Flames,” HTD-Vol. 341, pp. 193-200, 1997 National Heat Transfer Conference, Baltimore, Maryland, August 1997.
Seyed-Yagoobi, J., Hardesty, J.T., Raghupathi, P., and Bryan, J.E., “Experimental Study of Electrohydrodynamically Augmented Pool Boiling Heat Transfer on Smooth and Enhanced Tubes,” Proceedings of The 8th International Conference on Electrostatics, pp. 597-602, Poitiers, France, June 1997.
Page, R.H. and Seyed-Yagoobi, J., “Jet Impingement Visualization via Infrared Thermography,” Proceedings of The1st Pacific Symposium on Flow Visualization and Image Processing, Honolulu, Hawaii, Vol. 2, pp. 430-434, February 1997.
Narayanan, V., Seyed-Yagoobi, J., and Page, R.H., “Comparison of Heat Transfer Characteristics of a Slot Jet Reattachment Nozzle and a Conventional Slot Jet Nozzle,” HTD-Vol. 333, pp. 151-157, ASME International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, November 1996.
Mohr, J.W., Seyed-Yagoobi, J., Wirtz, J.W., and Price, D.C., “Thermal Contact Conductance of a Paper/Elastomer Interface,” HTD-Vol. 332, pp. 217-222, ASME International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, November 1996.
Bryan, J.E. and Seyed-Yagoobi, J., “Heat Transport Enhancement of Monogroove Heat Pipe with Electrohydrodynamic Pumping,” HTD-Vol. 327, pp. 131-138, National Heat Transfer Conference, Houston, Texas, August 1996.
Mohr, J.W., Seyed-Yagoobi, J., Page, R.H., “Heat Transfer from a Pair of Radial Jet Reattachment Flames,” HTD-Vol. 328, pp. 11-17, National Heat Transfer Conference, Houston, Texas, August 1996.
Seyed-Yagoobi, Narayanan, V., Page, R.H., and Wirtz, J.W., “Comparison of Heat Transfer Characteristics of Radial Jet Reattachment Nozzle to In-Line Impinging Jet Nozzle,” HTD-Vol. 324, pp. 85-92, National Heat Transfer Conference, Houston, Texas, August 1996.
Szymanski, V.G., Bryan, J.E., and Seyed-Yagoobi, J., “Theoretical Study of an Electrostriction Pump,” Proceedings of The 12th International Conference on Conduction and Breakdown in Dielectric Liquids, pp. 393-396, Rome, Italy, July 1996.
Bryan, J.E. and Seyed-Yagoobi, J., “Development of a Unique Facility to Measure Electrical Properties of Dielectric Liquids Over a Large Range of Temperature and Pressure,” Proceedings of The 12th International Conference on Conduction and Breakdown in Dielectric Liquids, pp. 488-491, Rome, Italy, July 1996.
Wawzyniak, M., Motte, E., Seyed-Yagoobi, J., and Lee, K.L., “Experimental Study of Electrohydrodynamically Augmented Condensation Heat Transfer on Smooth and Enhanced Tubes,” 95-WA/HT-21, ASME International Mechanical Engineering Congress and Exposition, San Francisco, California, November 1995.
Mohr, J.W., Seyed-Yagoobi, J., and Page, R.H., “Heat Transfer, Temperature, and Gas Analysis Measurements from an Array of Impinging Radial Jet Reattachment Flames,” Proceedings of The 1995 International Gas Research Conference, pp. 139-146, Cannes, France, Nov. 1995.
Geppert, C.A., Geppert, L.M., and Seyed-Yagoobi, J., “Electrohydrodynamically Enhanced Heat Transfer in Pool Boiling,” Basic Aspects of Two Phase Flow and Heat Transfer, HTD-Vol. 308, pp. 69-76, National Heat Transfer Conference, Portland, Oregon, August 1995.
Mohr, J.W., Seyed-Yagoobi, J., and Page, R.H., “Optimization of a Practical Radial Jet Reattachment Flame,” Combustion and Fire Research and Heat Transfer in High Heat-Flux Systems, HTD-Vol. 304, pp. 3-10, National Heat Transfer Conference, Portland, Oregon, August 1995.
Thiele, E.W., Seyed-Yagoobi, J., Page, R.H., and Castillo-Garcia, H., “Enhancement of Drying Rate, Moisture Profiling, and Sheet Stability on an Existing Paper Machine with RJR Blow Boxes,” Proceedings of The Technical Association of Pulp and Paper Industries Papermakers Conference, pp. 223-228, Chicago, Illinois, April 1995.
Mohr, J.W., Seyed-Yagoobi, J., and Page, R.H., “Temperature, Heat Transfer, and Pressure Measurements from an Impinging Radial Jet Reattachment Flame,” Proceedings of The ASME/JSME Thermal Engineering Joint Conference, Vol. 3, pp. 127-134, Maui, Hawaii, March 1995.
Wawzyniak, M., Motte, E., and Seyed-Yagoobi, J., “Experimental Study of Electrohydrodynamically Augmented Condensation Heat Transfer,” Proceedings of the IEEE-IAS Annual Meeting, pp. 1653-1660, Denver, Colorado, October 1994.
Asensio, M.C., Seyed-Yagoobi, J., and Tijerina, C.C., “Determination of the Capillary Pressure Function for Paper Using Centrifuge Data,” Proceedings of Technical Association of Pulp and Paper Industries Engineering Conference, pp. 981-989, San Francisco, California, September 1994.
Owsenek, B.L. and Seyed-Yagoobi, J., “A Numerical and Experimental Investigation of Corona Wind Heat Transfer Enhancement from a Horizontal Heated Plate,” Proceedings of 10th International Heat Transfer Conference, Vol. 6, pp. 79-84, Brighton, England, August 1994.
Habetz, D.K., Page, R.H., and Seyed-Yagoobi, J., “Impingement Heat Transfer from a Radial Jet Reattachment Flame,” Proceedings of 10th International Heat Transfer Conference, Vol. 6, pp. 31-36, Brighton, England, August 1994.
Seyed-Yagoobi, J., Page, R.H., Asensio, M.C., and Thiele, E.W., “Enhancement of Drying Rate in Paper Machines with Multi-Functional Radial Jet Reattachment Blow Boxes – Theoretical Analysis,” Proceedings of The 9th International Drying Symposium, pp. 661-666, Gold Coast, Australia, August 1994.
Asensio, M.C., Seyed-Yagoobi, J., Lehtinen, J.A., Karlsson, M.A., Timofeev, O.N., and Juppi, K., “Comparison of Several Multi-Cylinder Paper Drying Simulation Models,” Proceedings of The 9th International Drying Symposium, pp. 1171-1178, Gold Coast, Australia, August 1994.
Owsenek, B.L., Seyed Yagoobi, J., and Page, R.H., “Corona Wind Enhancement of Free Convection Heat Transfer,” 93-WA/HT-36, ASME Winter Annual Meeting, New Orleans, Louisiana, December 1993.
Habetz, D.K., Page, R.H., and Seyed Yagoobi, J., “Heat Transfer from a Radial Jet Reattachment Combustion Nozzle,” Fluid Mechanics and Heat Transfer in Sprays, HTD-Vol. 270, pp. 103-108, ASME Winter Annual Meeting, New Orleans, Louisiana, December 1993.
Page, R.H., Ostowari, C., Seyed Yagoobi, J., and Gruber, T.C., “Measurement of Impinging Jet Heat Transfer Utilizing Infrared Techniques,” Proceedings of 3rd World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Vol. 1, pp. 726 732, Honolulu, Hawaii, October 1993.
Gruber, T.C., Page, R.H., Seyed Yagoobi, J., and Albrecht, S.L., “Drying with Two Radial Jets: Development of RJR Drying Arrays,” Proceedings of Technical Association of Pulp and Paper Industries Engineering Conference, pp. 1041 1045, Orlando, Florida, September 1993.
Margo, B.D. and Seyed Yagoobi, J., “Heat Transfer Enhancement Under Various Orientations Resulting from Attraction Mode Induction Electrohydrodynamic Pumping,” Fundamentals of Heat Transfer in Electromagnetic, Electrostatic, and Acoustic Fields, HTD Vol. 248, pp. 35 42, National Heat Transfer Conference, Atlanta, Georgia, August 1993.
Margo, B.D., Seyed Yagoobi, J., and Bryan, J.E., “Effect of Frequency on Heat Transfer Enhancement in Temperature Induced Electrohydrodynamic Pumping,” Proceedings of The 11th International Conference on Conduction and Breakdown in Dielectric Liquids, pp. 539 544, Baden Dättwil, Switzerland, July 1993.
Bryan, J.E. and Seyed Yagoobi, J., “Analysis of Two-Dimensional Flow Field Generated by a One Electrode Pair Ion Drag Pump,” Proceedings of The 11th International Conference on Conduction and Breakdown in Dielectric Liquids, pp. 556 560, Baden Dättwil, Switzerland, July 1993.
Wang, J. and Seyed Yagoobi, J., “Effect of Water Turbidity on Thermal Performance of a Salt Gradient Solar Pond,” Proceedings of The 3rd International Conference Progress in Solar Ponds, pp. 291 304, El Paso, Texas, May 1993.
Wang, J. and Seyed Yagoobi, J., “Effects of Halo bacteria and Selected Chemicals on Radiation Transmission in Salt Water,” Proceedings of The 3rd International Conference Progress in Solar Ponds, pp. 305 317, El Paso, Texas, May 1993.
Thiele, E.W., Dautel, S.W., Page, R.H., and Seyed Yagoobi, J., “A New Paper Machine Drying Concept: Multi Functional Radial Jet Reattachment Nozzle Blow Box,” Proceedings of Technical Association of Pulp and Paper Industries Papermakers Conference, pp. 319 325, Atlanta, Georgia, April 1993.
Margo, B.D. and Seyed Yagoobi, J., “Heat Transfer Enhancement Resulting from Induction Electrohydrodynamic Pumping of a Single Phase Liquid,” CH 93 14 2 ASHRAE Winter Annual Meeting, Chicago, Illinois, January l993.
Asensio, M.C. and Seyed Yagoobi, J., “Simulation of Paper Drying Systems with Incorporation of an Experimental Drum/Paper Thermal Contact Conductance Relation-ship,” 4th Brazilian Thermal Science Meeting, Rio de Janeiro, Brazil, December 1992.
Dietz, E.C, Seyed Yagoobi, J., and Page, R.H., “Pressure and Heat Transfer Experiments Utilizing Radial Jet Nozzles with Mixing Flows,” General Papers in Heat Transfer and Heat Transfer in Hazardous Waste Processing, HTD Vol. 212, pp. 81 86, ASME Winter Annual Meeting, Anaheim, California, November 1992.
Seyed Yagoobi, J., Castaneda, J.A., and Bryan, J.E., “Theoretical Analysis of Ion Drag Pumping,” Proceedings of The IEEE IAS Annual Meeting, pp. 1412 1418, Houston, Texas, October 1992.
Asensio, M.C. and Seyed Yagoobi, J., “Theoretical Drying Study of Single Tier Versus Conventional Two Tiered Dryer Configurations,” Proceedings of Technical Association of Pulp and Paper Industries Engineering Conference, pp. 371 382, Boston, Massachusetts, September 1992.
Page, R.H., Ostowari, C., and Seyed Yagoobi, J., “Infrared Images of Jet Impingement,” Proceedings of The 20th International Congress on High Speed Photography and Photonics, Vol. 1801, pp. 703 709, Victoria, British Columbia, Canada, September 1992.
Asensio, M.C. and Seyed Yagoobi, J., “Further Analysis of Heat and Mass Transfer in a Paper Sheet During Drying,” Fundamentals of Heat Transfer Porous Media, HTD Vol. 193, pp. 123 130, National Heat Transfer Conference, San Diego, California, August 1992.
Stevens, A.D., Asensio, M.C., and Seyed Yagoobi, J., “Measurements of Thermal Contact Conductance for a Paper/Metal Interface and Effective Conductivity of Machine Samples,” Drying ’92, Proceedings of The Eighth International Drying Symposium, pp. 963 972, Montreal, Canada, August 1992.
Habetz, D.K., Page, R.H., and Seyed Yagoobi, J., “A Drying Comparison of Radial Jet Reattachment and Standard ln Line Jet Impingement,” Drying ’92, Proceedings of The Eighth International Drying Symposium, pp. 953 962, Montreal, Canada, August 1992.
Asensio, M.C., Seyed Yagoobi, J., and Fletcher, L.S., “Thermal Contact Conductance Determination for Paper Drying Applications,” U.S. Australia Joint Seminar on Enhanced Thermal Contact Conductance in Microelectronics, pp. 125-131, Melbourne, Australia, May 1992.
Wang, J. and Seyed Yagoobi, J., “Effect of Water Clarity and Salt Concentration at Various Depths of Water on Insulation,” Proceedings of The ASME, JSES and KSES International Solar Energy Conference, pp. 651 656, Maui, Hawaii, April 1992.
Asensio, M.C., Seyed Yagoobi, J., Ng, K.H., Fletcher, L.S., and Pulkowski, J.H., “Thermal Contact Conductance of a Moist Paper Hand sheet/Metal Interface,” Fundamentals of Forced and Mixed Convection and Transport Phenomena, HTD Vol. 180, pp. 57 63, ASME Winter Annual Meeting, Atlanta, Georgia, December 1991.
Castaneda, J.A. and Seyed Yagoobi, J., “Electrohydrodynamic Pumping of Refrigerant 11,” Proceedings of The IEEE IAS Annual Meeting, pp. 500 503, Dearborn, Michigan, September 1991.
Seyed Yagoobi, J. and Bell, D.O., “Heat and Mass Transfer in a Paper Sheet During Drying,” Advances in Heat Transfer Augmentation and Mixed Convection, HTD Vol. 169, pp. 23 30, National Heat Transfer Conference, Minneapolis, Minnesota, July 1991.
Ng, K.H., Seyed Yagoobi, J., Asensio, M.C., and Fletcher, L.S., “Thermal Contact Conductance of a Bone Dry Paper Hand sheet/Metal Interface,” 91 HT 35, National Heat Transfer Conference, Minneapolis, Minnesota, July 1991.
Babin, B.R., Peterson, G.P., and Seyed Yagoobi, J., “Experimental Investigation of an Ion Drag Pump Assisted Heat Pipe,” AIAA 26th Thermophysics Conference, Honolulu, Hawaii, June 1991.
Wang, J. and Seyed Yagoobi, J., “Review of Salt Gradient Solar Pond Models,” Proceedings of The ASME JSME JSES Solar Conference, pp. 59 68, Reno, Nevada, March 1991.
Seyed Yagoobi, J., Bell, D.O., and Fletcher, L.S., “Theoretical and Numerical Analysis of Heat and Mass Transfer in a Paper Sheet During Drying,” Heat Transfer and Flow in Porous Media, HTD Vol. 156, pp. 31 39, ASME Winter Annual Meeting, Dallas, Texas, November 1990.
Bohinsky, B.J. and Seyed Yagoobi, J., “Induction Electrohydrodynamic Pumping Selecting an Optimum Working Fluid,” Proceedings of The IEEE IAS 1990 Annual Meeting, pp.795 801, Seattle, Washington, October 1990.
Page, R.H and Seyed Yagoobi, J., “A New Concept for Air or Vapor Impingement Drying,” Proceedings of Technical Association of Pulp and Paper Industries Engineering Conference, pp. 387 392, Seattle, Washington, September 1990.
Bryan, J.E. and Seyed Yagoobi, J., “Ion Drag Electrohydrodynamic Pumping Selecting an Optimum Working Fluid,” Proceedings of 10th International Conference on Conduction and Breakdown in Dielectric Liquids, pp. 316 322, Grenoble, France, September 1990.
Bell, D.O., Seyed Yagoobi, J., and Fletcher, L.S., “A Review of Developments in Paper Drying,” General Papers: Phase Change and Convective Heat Transfer, HTD Vol. 129, pp. 157 164, AIAA/ASME Thermophysics and Heat Transfer Conference, Seattle, Washington, June 1990.
Seyed Yagoobi, J., Gross, R.D., and Palazzolo, A.B., “Electrostatic Charge Build up in Lubricating Channels of Turbo-machinery,” Proceedings of The Third International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Vol. 2: Dynamics, pp. 626 633, Honolulu, Hawaii, April 1990.
Seyed Yagoobi, J., “Theoretical Study of Induction Electrohydrodynamic Pumping in the Flow Direction,” Convection Heat Transfer and Transport Processes, HTD Vol. 116, pp. 13 20, ASME Winter Annual Meeting, San Francisco, California, December 1989.
Bryan, J.E. and Seyed Yagoobi, J., “Experimental Study of an Ion Drag Pump in a Vertical and Axisymmetric Configuration,” Proceedings of The IEEE IAS 1989 Annual Meeting, pp. 2094 2099, San Diego, California, October 1989.
Seyed Yagoobi, J., “A Theoretical Study of Induction Electrohydrodynamic Pumping in Outer Space,” Collected Papers in Heat Transfer, HTD Vol. 104, pp. 69 76, ASME Winter Annual Meeting, Chicago, Illinois, November 1988.
Seyed Yagoobi, J., “An Advanced Viscometric Thermometer: Steady and Unsteady State Temperature Measurement in Electric or Magnetic Fields,” Developments in Experimental Techniques in Heat Transfer and Combustion, HTD Vol. 71, pp. 19 22, National Heat Transfer Conference, Pittsburgh, Pennsylvania, August 1987.
Seyed Yagoobi, J., Chato, J.C., Crowley, J.M., and Krein, P.T., “Induction Electrohydrodynamic Pump in Vertical Configuration, Part 1 Theory,” Proceedings of the IEEE IAS 1985 Annual Meeting, pp. 1567 1573, Toronto, Canada, October 1985.
Seyed Yagoobi, J., Chato, J.C., Crowley, J.M., and Krein, P.T., “Induction Electrohydrodynamic Pump in Vertical Configuration, Part 2 Experimental Study,” Proceedings of the IEEE IAS 1985 Annual Meeting, pp. 1574 1579, Toronto, Canada, October 1985.
Seyed Yagoobi, J., Chato, J.C., Crowley, J.M., “Temperature Induced Electrohydrodynamic Pumping in Axisymmetric, Vertical Configuration,” 85-HT 16, National Heat Transfer Conference, Denver, Colorado, August 1985.
Seyed Yagoobi, J., Krein, P.T., Crowley, J.M., and Chato, J.C., “Effect of Long Term Low Level Charge Injection on Insulating Oil,” Proceedings of The IEEE Conference on Electrical Insulation and Dielectric Phenomena, pp. 307 311, Claymont, Delaware, October 1984.
Seyed Yagoobi, J., Chato, J.C. and Crowley, J.M., “Viscometric Temperature Measurement in Electric or Magnetic Fields,” Proceedings of The ASME/JSME Thermal Engineering Joint Conference, Vol. 4, pp. 57-61, Honolulu, Hawaii, March 1983.