Publications

I. Journal Publications

  1. K. Diouri, T. El-Korchi, N. Karanjgaokar, R.B. Mallick, “Aging and temperature effects on the dynamic characteristics of asphalt mortar under impact loading“, Construction and Building Materials 369, 130572, (2023).
  2. H. Kocharyan, N. Karanjgaokar, “Development of Adaptive Granular Metamaterials for Impact Mitigation,” Extreme Mechanics Letters 101943, (2023).
  3. M. Kodali, P. Bharadwaj, S. Bhavanam, N. Karanjgaokar, “Semi-Analytical Approach to Determine Interfacial Adhesion in Polymer-Bonded Explosives,” Experimental Mechanics, 63, 237–250, (2023).
  4. H. Kocharyan, N. Karanjgaokar, “Influence of Interactions Between Multiple Point Defects on Wave Scattering in Granular Media,” Granular Matter 24 (1), 1-11, (2022).
  5. H. Kocharyan, N. Karanjgaokar, “Wave Propagation through Submerged Granular Media over a Wide Range of Fluid Viscosities,” Powder Tech. 380, 126-133, (2021).
  6. S Bhavanam, N Karanjgaokar, “Development of miniaturized peel experiments to quantify interfacial adhesion between 2D monolayers and viscoelastic polymers“, The Journal of Adhesion, 1-23, (2020).
  7. H Kocharyan, N Karanjgaokar, “Influence of Lateral Constraints on Wave Propagation in Finite Granular Crystals“, Journal of Applied Mechanics 87 (7), (2020).
  8. N. Karanjgaokar, “Energy Considerations in Granular Materials during Impact Experiments”, Granular Matter 19, pp. 36 (2017).
  9. N. Karanjgaokar, I. Chasiotis, “Creep behavior of nanocrystalline Au films as a function of temperature”, Journal of Materials Science 51, pp. 3701, (2016).
  10. N. Karanjgaokar, F.V. Stump, P.H. Geubelle, I. Chasiotis, “A thermally activated model for room temperature creep in nanocrystalline Au films at intermediate stresses”, Scripta Materialia 68, pp. 551(2013).
  11. F.V. Stump, N. Karanjgaokar, P.H. Geubelle, I. Chasiotis, “A multiscale model of rate dependence of nanocrystalline thin films”, International Journal For Multiscale Computational Engineering, 10, pp. 441 (2012).
  12. N. Karanjgaokar, C.-S. Oh, I. Chasiotis, “Inelastic deformation of nanocrystalline Au thin films as a function of temperature and strain rate”, Acta Materialia 60, pp. 5352 (2012).
  13. L. Sun, N. Karanjgaokar, K. Sun, I. Chasiotis, W.C. Carter, S. Dillon, “High-strength all solid lithium ion electrodes based on Li4Ti5O12”, Journal of Power Sources 196, pp. 6507 (2011).
  14. K. Jonnalagadda, N. Karanjgaokar, I. Chasiotis, J. Chee, D. Peroulis, “Strain rate sensitivity of nanocrystalline Au films at room temperature”, Acta Materialia. 58, pp. 4674 (2010).
  15. N. Karanjgaokar, C.-S. Oh, I. Chasiotis, “Microscale Experiments at Elevated Temperatures Evaluated with Digital Image Correlation”, Experimental Mechanics 51, pp. 609 (2010).

II. Conference Publications

  1. H Kocharyan, N Karanjgaokar, “Effects of Fluid Viscosity on Wave Propagation Through Submerged Granular Media,” Conference: 2019 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, Dynamic Behavior of Materials, Volume 1, 331-333, 2019.
  2. S Bhavanam, N Karanjgaokar, “Influence of Adhesion on the Mechanical Response of Granular Composites,” Conference: 2019 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, Mechanics of Biological Systems & Micro-and Nanomechanics, Volume 4, 85-90, 2019.
  3. S. Bhavanam, N. Karanjgaokar, “Experimental Quantification of Interfacial Adhesion on the Thermo-Mechanical Response of Granular Composites,” Conference: 2018 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, MEMS, and Nanotechnology, Volume 2, (2018).
  4. H. Kocharyan, N. Karanjgaokar, “Effects of liquid viscosity on wave propagation through liquid submerged granular media,” Conference: 2018 SEM Annual Conference on Experimental and Applied Mechanics, Dynamic Behavior of Materials, Volume 1, (2018).
  5. N. Karanjgaokar, G. Ravichandran, “Study of Energy Contributions in Granular Materials during Impact”, Conference: SEM 2015 Annual Conference on Experimental and Applied Mechanics, Dynamic Behavior of Materials, Volume 1, (2015).
  6. N. Karanjgaokar, G. Ravichandran, “Experimental Inference of Inter-particle Forces in Granular Systems Using Digital Image Correlation”, Conference: SEM 2014 Annual Conference & Exposition on Experimental and Applied Mechanics, Session 75: DIC Applications in Challenging Environments I, (2014).
  7. N. Karanjgaokar, C. S. Oh, I. Chasiotis, “Experimental Methods for Tensile Testing of Metallic Thin Films at High Temperatures”, Conference: 2011 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, Volume 2: MEMS and Nanotechnology, (2010).
  8. C.-S. Oh, N. J. Karanjgaokar , I. Chasiotis,  “Effect of Temperature on the Mechanical Properties of thin gold film and the effect of strain rate”, Proceedings of The Korean Society of Mechanical Engineers, 2010 Lecture and Conference, 91-93, (2010).
  9. N. Karanjgaokar, I Chasiotis, “Nanocrystalline FCC Thin Films Are More Prone to RT Creep Than What We Think”, Conference: 2009 ASME International Mechanical Engineering Congress and Exposition, Volume 11: Mechanics of Solids, Structures and Fluids, (2009)
  10. N. Karanjgaokar, I. Chasiotis, D. Peroulis, K. Jonnalagadda, “Strain Rate and Creep Response of Au and Ni Thin Films”, Conference: 2009 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, 2009.
  11. N. Karanjgaokar, K. Jonnalagadda, I. Chasiotis, J. Chee, A. Mahmood, D. Peroulis, “Mechanical Behavior of Nanocrystalline Au Films as a Function of Strain Rate and Film Thickness”, Conference: 2008 SEM XI International Congress & Exposition on Experimental & Applied Mechanics, (2008).

Copyright 2024 © ASML
All Rights Reserved.

ASML
Worcester Polytechnic Institute
100 Institute Road, Worcester, MA 01609